Donate SIGN UP

DIY

1421 to 1440 of 1665

First Previous 69 70 71 72 73 74 75 Next Last

Avatar Image
knockavacca
hi, my 12 year old garage roof is showing several patches of rust,i thought that "galvanise" was not soposed to rust,can anyone offer any suggestions please
Avatar Image
martin77
hi my daughter has pulled the front room radiator screws out from the wall.ive turned off both valves at the side and i have it propped up with the settee(dont laugh). i cant afford the plumber 60...
Avatar Image
happyone2
If your room is a bit wonky do you put the curtain rail up properly straight or straight to the wonkyness of the room. IE so it is straight or straigh looking? Thank you...
Avatar Image
lindylou16
So where do you stand on the use of ladders?.
Avatar Image
keyplus90
Seems like I have a problem with thermostat. When I turn it slightly I can hear a click and bolier kicks on but if I want to turn the heating off and turn thermo other way then it still clicks but...
Avatar Image
jackiewalker59
too difficult to remove. What paint can i use to cover tiles.
Avatar Image
Cumbria41
Do you think the wall mounted key safes, outside a front door, are safe or could they be easily broken into?
Avatar Image
Thunderchild
I'm putting my radiators back, I have an olive fitting with a swivel nut on the rad that fits onto a fitting with an internal cone, I take it i do need a rubber washer between the two and not ptfe...
Avatar Image
carmalee
had 2 really helpful answers from The Buider and Whoever re my question about leaving radiators on as I'm going away for six weeks during Dec/Jan. I had intended to leave three rads on freezer...
Avatar Image
norfolkgal
I have three dripping taps , but the problem is they are old and I dont think I can undo them to try and change the washer. One Is an old pilliar bath tap. is there any way I can get these old taps...
Avatar Image
dance2trance
The sink is leaking a bit where it meets the U bend. Thought I'd seal the gap with chewing gum. Then sterlise. Gunm dries rock hard and waterproof. Cheaper and quicker than putty. But are there any...
Avatar Image
slid_away
Hi All I'm after purchasing some external ladders which will easily reach gutter height (average semi house). I know I can search the internet for some but I think if someone can recommend from here...
Avatar Image
chrisgolf0
what is the best way to remove black coffee stains from beige carpet please? have just used cold water and a steam cleaner so far but stains remain.thanks in advance
Avatar Image
jarney
Hi, I'm looking to paint the skirting boards in my bathroom, living room and possibly one bedroom. They're not new, they're already painted in an off whitish colour, possibly magnolia as the walls are...
Avatar Image
supergran
I am moving shortly and I haven't got transit bolts for my washing machine,do I need to buy some or can the machine go without..I will be moving 80 miles away.
Avatar Image
joesdaddy
My combi boiler keeps losing pressure I top it up to 1 bar and it takes roughly half a day to go down to 0.5 of a bar it is bleed properly so there is no air in the system . The first thing I thought...
Avatar Image
pawwaw17
was wondering if a spot welder would work to get a tidy finnish. will not need a huge ammount of strength, so the weld does not need to be large
Avatar Image
Groupie
Just bought a new front door, Letter box and doorbell included for just 15 quid. Can't knock it. ....
Avatar Image
woolleysheep
i have a tarmac drive which i want extending ( made wider to take two cars ),what is the best way to do this with alimited buget
Avatar Image
CAJ1
Hi, Just brought a new build house and there is a vent in the living room fairly near the ground which is apparantly for carbon monoxide to escape (we have a gas fire in our living room). The problem...

1421 to 1440 of 1665

First Previous 69 70 71 72 73 74 75 Next Last