Donate SIGN UP

DIY

1581 to 1600 of 1665

First Previous 77 78 79 80 81 82 83 Next Last

Avatar Image
horseshoes
Every year without fail, we get ants in our kitchen and until this year the bathroom too. A few months ago we installed a new kitchan and bathroom. When we took out the old kitchen units, I couldn't...
Avatar Image
slid_away
Hi All All the doors in my house are the original doors and are beautiful. Everyone of them have the old brass ball knob onto a lock with keyhole. The trouble is there are no keys to any of the locks....
Avatar Image
philkool
when i turn on the new hot tap in the kitchen it bangs and vibrates. is it because its a cheap tap ?
Avatar Image
goldentouchgirl
That pic I doodled din't come out right so amount for the whole 5.7 square meters would be great! Please help
Avatar Image
goldentouchgirl
I need to buy vinyl flooring which comes in a 4m length my hall is 240cm x 240 cm (it's not its an irregular L shape but this is easiest - although I suppose cheaper to actually work out - I don't...
Avatar Image
Jemisa
My husband has noticed that the reinforcing wire mesh is showing through the concrete facing and cracking it. - What do you think is causing this to rust. Its not open to the eliments, the concrete is...
Avatar Image
blade1jet2
I say if there is no 110volt there then you can use 240volt if in a low risk area ie in a area were there isnt many people working and you are only running it a small distance ie less than 4 metres....
Avatar Image
rkp52
Does anyone know where I can get replacement cables for a cardale garage door number AJFC7070 jacobean fmd prima 70x70 Many thanks in advance
Avatar Image
stuck123
Can anyone tell me where i can buy the cheapest monoblock for my driveway In Scotland. Thanks
Avatar Image
Eastender
Hi, Can anyone give me any tips on how to get up floor vinyl tiles, the ones that have a sticky back. When I put them down the backs had a peel off thin paper and I'm sure I added a bit of adhesive...
Avatar Image
micko1962
WE have a large unremovable stain on our cast iron bath, was wondering if we can buy paint to do the job ourselves??
Avatar Image
kaseyfour
hi can any one help i've got a sime super 90 that keeps building the pressure up to over three bar and then dumps it out through prv valve. i have changed the ball valves both sides of the filling...
Avatar Image
bluetoon
hi any tips on how to replace double glazing beads as i am having a problem getting them back in position after fitting new glazed unit
Avatar Image
Gmcd01
First up, I hope the DIY section suits my needs: I've noticed recently in my parent's house that when I turn on an electric appliance, the lights in that room flicker for a split second. For example,...
Avatar Image
bluebird34
Some of the lead on my front window has come away - can anyone tell me if I can glue it back myself and if so what adhesive should i use thank you - Janet
Avatar Image
quizbag
My toilet cistern flushes ok but takes forever to fill. Is there anything that a cack-handed DIYer like me can do before I call in a plumber? Thanks.
Avatar Image
crapmemory
I painted an MDF cupboard with MDF paint last year but now it needs repainting as it looks a bit grubby. Do I need to use MDF paint again or can I just use Satin or Gloss paint? TIA
Avatar Image
colinb61
I have a Cannon Cambridge Double Oven and evey time I light either oven, which has to be done manually, the ignition constantly fires until the oven is switched off. This does not happen when just...
Avatar Image
Toleman
Can an oil filled radiator be put onto a normal domestic timer. Its on the lowest setting of 500w and in the greenhouse. I will be away for some of the weekend so I want it to come on at night. I have...
Avatar Image
Papaleekie
I wish to run a 4 gang trailer socket to supply power to tv, dvd, freeview box in a bedroom. The trouble is the desired location is about 10 feet from the nearest socket. The longest trailer socket I...

1581 to 1600 of 1665

First Previous 77 78 79 80 81 82 83 Next Last