Donate SIGN UP

DIY

121 to 140 of 1665

First Previous 4 5 6 7 8 9 10 Next Last

Avatar Image
gl556tr
I am having new windows with better insulation installed. They will be higher than the current ones, as whey will replace the draughty box containing the external roller-blinds. Is there somebody who...
Avatar Image
gl556tr
1) a full-width fruit drawer; 2) a full-width veg drawer; 3) 200 L - 220 L 4) A+++ 5) free-standing --> combined with Freezer 30 L - 40 L --> Fridge can be switched off Are there any models that could...
Avatar Image
zebo
We have a Bosch fridge/freezer, about 4 years old. We've just been on holiday for four weeks and when our daughter came over last weekend the alarm was buzzing and she had to dump all the contents and...
Avatar Image
johnny37
i am looking to buy one to drill some concrete. there are several on amazon for £50/£70. I do not want a heavyweight super professional model. weight shouLd not be too heavy for me to operate. I...
Avatar Image
Sellergarth
I recently replaced one of the rubber seals at the joint of two sections of plastic guttering after the original one perished. I could not get one exactly the same but it did seem to make a secure,...
Avatar Image
gl556tr
(1) Freezer & Fridge together in one housing - but having separate cooling systems. OR (2) separate Freezer & Fridge. Both as floor-mounted appliances, freezer with 50 litres, fridge with with (2) one...
Avatar Image
Tilly2
The paint on the ceiling in the utility room developed a crack and when I removed some of the paint there are these 'fungi'? underneath. The ulility room is directly under the ensuite. I suspect we...
Avatar Image
gl556tr
I am intending to fit Plexiglass (acrylic glass) rear-panelling to my kitchen work-top, using silicone as the sealant. Now I have been advised to use an acrylic sealant. Having never considered the...
Avatar Image
interele
I want a radiator cover for a radiator that is set stupidly high. Most radiator covers are about 80-81 cm tall - I need one 105cm - does anyone know a place that does them without having them built to...
Avatar Image
gl556tr
I am preparing to fit new bits and pieces in the kitchen. The current stage is looking for a suitable kitchen sink, which could be round and two-staged. I find stainless steel noisy and am considering...
Avatar Image
gl556tr
I am preparing to fit new bits and pieces in the kitchen. I am currently looking for a tap, possibly with a pull-out 'shower' head. Most appear to be chrome-finished. I would appreciate advice from...
Avatar Image
pussyfoot
What is the best gloss paint to use without it going yellow after a few months? TIA....
Avatar Image
gl556tr
I have seen LED panels on a wall which can be remote-controlled: both colour and brightness/intensity can be changed. This subtle control of ambient lighting caters for most situations. The opaque...
Avatar Image
gl556tr
I am preparing for a new kitchen. My current one has a gas hob, which, I think, is better than electric/ceramic. With prices for induction hobs tumbling, I am considering going for an induction hob....
Avatar Image
chipmunkmike
I am looking for some 4ft x 8ft boards to create my own photography backdrops. I have visited my local Wickes store and they supply both polystyrene boards and Celotex insulation boards. It seems that...
Avatar Image
Old_Geezer
Hopefully a quick question. If I buy a Torx security screwdriver say TT30 can that be used without issue to screw in a Torx normal screw i.e. T30 ? It's that I a need to get one locally, quickly, and...
Avatar Image
pussyfoot
I'm looking to re-fit my kitchen & bathroom in the spring as I'm disabled after a stroke, I've been inundated with quotes and catalogues, that all seem quite expensive so I'm trying to mix & match...
Avatar Image
SureShotSean
Hi there everyone, I am moving into a studio flat at the end of the year and as you can imagine it's not a very big room. I want to build a bunk bed to free up as much floor space as possible. Only...
Avatar Image
woodchopper
Am putting up a second hand rail to assist an elderly woman up the stairs on the wall side which doesn't have a rail. Have got the rail cut to size (3.75m). Now, how do I mount the rail - have got 4...
Avatar Image
fbg40
Hi I'm looking for a plastic guard/protector to cover the teeth on a 22" handsaw and a 12" tenon saw. Have tried googling but to no avail. Any help much appreciated. FBG40...

121 to 140 of 1665

First Previous 4 5 6 7 8 9 10 Next Last