Donate SIGN UP

DIY

221 to 240 of 1665

First Previous 9 10 11 12 13 14 15 Next Last

Avatar Image
tandh
Hey, I brought the below primer to paint some untreated external wood posts. if i am happy with the look of them after using just the primer do i still have to go over them with external paint, or...
Avatar Image
tandh
I need to cut out a 2mm deep small rectangle out of mdf board which is about 5cm thick, it doesn't have to be too neat, but i have no idea how to do it, i was thinking with a chisel maybe? what do you...
Avatar Image
Ric.ror
I'm freezing - the boiler keeps firing up for a couple of seconds then off again! Then back on then off again etc The pressure is at zero but if it was that surely it wouldn't fire up at all Or would...
Avatar Image
teregram
Can anyone recommend a tried and trusted dap seal paint to go on wallpaper.
Avatar Image
crapmemory
I would like to paint some MDF with black gloss paint. Do I need an undercoat and if so, what type and colour? TIA
Avatar Image
interele
We have removed 2 ( leaking ) radiators, one 2m and one 3m Do they have any value as scrap if I get the local scrap man to take them or should I just be grateful if someone takes them away...
Avatar Image
BJS
I have been searching the web trying to find a Turret extension lead where each power socket on it has its own switch like some of the flat ones have. Have found loads of turret's but none of them...
Avatar Image
Kassee
I am thinking of having some building work done by a friend, who will be charging me £120 per day (8 to 5) plus I buy all the materials (patio and wall). Is that the going rate - does any one know....
Avatar Image
fishing81
The pop up waste plug has broken and have decided to go back to the good old plug and chain.Are basin plug holes in the basins all about the same size as I would like to remove the old pop up and...
Avatar Image
interele
From where to where do you measure a radiator From the end of the actual radiator or from the end of the couplings Ta M...
Avatar Image
browndmb
The wall is plastered and painted but cracks have appeared and the paint is flaking off. Any help with how to tacle this problem would be appreciated. I wonder if just painting over will do the trick...
Avatar Image
aquilotta
Hi. I need to put up some shelving in my kitchen. I've had an MDF board cut to size, and bought some wall brackets, and am now looking at buying some pre-glued melamine edging for the shelves to...
Avatar Image
Ric.ror
My mother has a small built in wardrobe with a hanging rail which needs new fixings to secure it against the walls Where could I source these and what would they be classed as? TIA...
Avatar Image
tali1
Had a new boiler fitted this year and it has had problem from from the onset.It goes into cycle of warm water , a bit of cold and then a bit of boiling hot and then it turns cold the longest .The...
Avatar Image
tandh
What is the best way to do this and what nails/ screws should i use?...
Avatar Image
langara
We have a welsh dresser we would like to varnish a few shades darker, I know there are numerous varnishes on the market but which is the best. Thanks...
Avatar Image
Budlet
I have just cleaned up my kitchen floor tiles. What is the best product to use to waterproof and seal them? I don't want a shiny finish.
Avatar Image
Hopkirk
Advice please. At my Mum's house I had to unplug the dishwasher and pull it out.out. When I plugged it back in to the socket, which had the switch in the off position, the circuit breaker for the...
Avatar Image
tandh
has anyone got any tips for drilling though a door with a gloss finish to attach the door handle. I have no room error with regards to the position of the hole, because of the type of handle. I'm so...
Avatar Image
tandh
i brought a new integrated washing machine last year and i've lost the bloody hinges that came with it so you can attach the door to it. I've called hover and they want to charge me £50 to replace...

221 to 240 of 1665

First Previous 9 10 11 12 13 14 15 Next Last